Masterpiece arms mac 10 field strip

Well it's just like on the M A takedown button is located in front of the rear sight. Pressing the button allows to lift the top cover off, revealing the massive metal bolt and the recoil spring assembly. Pulling the bolt back a bit allows you to lift up the front, and pull everything out forward at an angle. You now have full access to each and every part you need to clean and lubricate in order to keep the Mini UZI running.

The disassembly procedure is exactly the same as on the real Mini UZI, which means you don't need tools and it's simple to do even with a blindfold on.

Post navigation

For example the blowback assembly comes apart without any tools, and there are no small parts or pins to lose. KWC has omitted the spring from the floating valve entirely, because the position is controlled by the BB, and it is closed by the gas flow when the BB is shot. It doesn't even have a retainer of any kind, because it is supported in the rear by the piston head. The loading nozzle comes off simply by pulling it at a slight angle, and you can then shake the floating valve out from the rear of the nozzle. The piston head is an improved model to get a better efficiency and kick, but it can also be replaced by upgrade piston heads with a thick enough O-ring.

After unscrewing the barrel nut and removing its retainer, you can use the front sling mount as a pin to drive out the grip pin. The Mini UZI is now completely disassembled, and the amount of tools required was again a round zero.

Related titles

Do click on the detail strip picture for all the components and their names! The firing system of the Mini UZI is rather interesting, because it's a closed bolt variant. This system was developed for demanding users, who felt that the "lock time" time from pulling the trigger to the bullet leaving the barrel was too long with an open bolt weapon, such as the original UZI.

An open bolt design would also nudge a bit right before firing, which isn't exactly a desired feature when you want to place a precise shot. The trigger is linked to a similar sear system as with an open bolt, but the bolt is split into a separate bolt and "striker", which is actually a linear hammer. When the weapon is cocked, the sear only catches the linear hammer, and the bolt returns forward chambering a round from the magazine. When the trigger is pulled, the linear hammer knocks the valve open ignites the primer on the real one via a firing pin, and the blowback action pushes both the linear hammer and bolt back to the rear, where the former is caught again and the bolt returns forward.

If the selector is on Auto, the bolt trips an auto sear as it goes into battery, releasing the linear hammer for another shot. The Marui MAC doesn't strip quite that far without tools. Actually apart from changing the battery, you will need at least an allen key for any disassembly, for example to change the fuse. There wouldn't be much to see on the inside anyways, because the receiver houses an enclosed gearbox unit.

The beauty of an AEP lies in the fact that you never need to disassemble it for regular maintenance. Simply keeping the barrel and hop-up clean is enough to keep an electric gun running for five-figure numbers easily, and we're not just saying it'll reach only 10k.

As a nice feature, the outer barrel of the MAC is double-threaded. It has a large thread for the included foam-filled suppressor unit, but unscrewing the muzzle with a tool that engages the mock rifling! The tool doubles as a disassembly tool for the suppressor, in case you want to replace the foam baffles with a tracer unit for a cool tracer effect in the dark! But if you're like Chuck Norris and are comfortable with either or one in both hands , you should look at the things that set the models apart deeper than the surface.

A gas gun undoubtedly is more fun to shoot, provides a menacing sound and a more realistic action. In this case the gas model is also clearly more powerful and realistic when it comes to the weight. With some models like the Marui vs. Maruzen Scorpion the difference in power is smaller, and the Scorpion AEP is actually the more refined when it comes to the finishing.

What people in cooler countries can appreciate in an AEP, is the fact that it provides a stable performance even if the temperature has dropped a few degrees, and keeps working even when you go below zero, while gas guns start venting and the performance becomes very poor. Switching between two batteries with one close to your body is likely to keep the MAC running in any conditions where you would dare to play. You could think of the AEP as a scooter that takes you to work or the mall every day, and won't let you down when you need it.

This has been added to your shoppping cart. Home Sitemap. Sign up Forget Password Cart is empty.

Enlarge Image. Sign up Forget Password. Cart is empty. Verdict Both of these SMGs have plenty of virtues, and you can't really go wrong with either. The takedown pin can only be pressed after activating the safety. The pin is captive to avoid losing parts. The battery goes in with the sticker side down against the barrel. It only goes in one way, so there's no worries about the direction.

The top of the magazine looks whole when it's out, but the rear part compresses to make way for the gearbox as you insert it. The Mini-UZI is supplied with the basic accessories only. As a nice touch, the manual is in English and has its own compartment to keep it accessible.

The magazine is powered by CO2 capsules. The bottom cap can be replaced with [KW] for Green Gas use. The hop-up is increased by turning the barrel nut clockwise.

Disassembly and reassembly 2

The barrel nut retainer provides a very accurate click-adjustment and holds the setting well. Hop-up adjustment is located inside the ejection port, as usual with electric guns.

  1. Primary Source.
  2. Play World of Guns: Gun Disassembly;
  3. Quick Links!

The adjustment is every bit as nice as we expect from Tokyo Marui. It's still an SMG, as it is designed to be fired against the shoulder and the stock is integrated. Are you a Mac person? The included suppressor makes the MAC surprisingly large. To be honest, the 12" PowerBook is a small machine so it adds the contrast. A disclaimer is placed below the receiver. It's not visible when you handle the weapon normally. This pistol is just chock full of standard features that in times past would only be found on a customized On top of the slide, a Novak-type rear sight is mounted in a dovetail.

On my hard-chrome sample pistol, the rear sight is blue, and the backside facing the shooter is finely serrated to reduce glare. The red fiber-optic front sight is also attached via a dovetail cut in the slide. The ejection port is lowered and flared to reduce brass deformation, and there are 10 well-defined serrations on the rear of the slide.

Both sides of the slide have the MAC emblem near the rear, while the left side of the slide is laser-cut with the MAC and Bobcut logo.

Talk:Rainbow Six Siege - Internet Movie Firearms Database - Guns in Movies, TV and Video Games

The extractor and firing-pin retention plate are blued and give a nice contrast to the chrome-matte finish. The hammer is a sketelonized, Commander-style version, and the Bobcut is equipped with a full-length guide rod for the recoil spring. For more information, please visit metroarms.

Product Details

The Maximus Arms Gladiator looks mostly like a standard Based on the spec sheet and general observation, there are some obvious and some subtle differences, mostly in the frame. The model includes an integral, flared mag well and a lower lip. It is matched to a custom mainspring housing that includes a lanyard loop, and it is indented to make for a larger mag well opening.

Integrated into the slide, it is matched, smoothed and well melted. Coupled with a custom-made grip safety and a high-cut frontstrap, you get as high a grip as is possible with a pistol. As a tactical pistol, the Gladiator includes a rail, but unlike most it includes three notches, not just one, allowing for just about any light and even some of the new lasers to mount up easily. There was no checkering on the front- and backstraps though a fish-scale mainspring housing is now being offered to customers as an option free of charge.

  • Citadel Warbird 1911 Review – Range Impressions and Field Strip;
  • semi permanent eyebrow pen mac!
  • COMBAT HANDGUNS' 19 Top s of ;
  • You may also need;
  • install gcc compiler mac os x lion?
  • Smith & Wesson Licensed M&P40 Full Size Airsoft Spring Pistol (Color: Dark Earth).
  • Everything on the frame is nicely melted and smooth. An extended slide stop is cut flush with the frame on the right side. This pistol has a single-side, tactical-style safety and a slightly extended magazine release. The trigger is a match aluminum design, and it broke cleanly. It houses a match-grade barrel that is mated to a match bushing. The ejection port is flared and lowered for solid ejection, and a. Cocking serrations are located at both the front and the rear. Front sighting is accomplished with a fiber optic that is dovetailed.